Contractors

StormChamber Systems Are Designed To Make Retention, Detention, Conveyance & Reuse Easy & Cost Effective

StormChamber storm water chambers are quicker and easier to install than other types of underground storm water chamber systems. The side-portal feed provides greater flexibility in engineering and hydraulic design, eliminating circuitous routing of feed pipes from inlet structures to entry point of a header pipe. The StormChamber storm water management system provides an environmentally progressive and technologically advanced storage and pollutant removal solution cost-effective and requires less maintenance than other types of underground storm water management systems.

Why Choose StormChambers?

  • Multiple Manufacturing Locations: Available throughout the US
  • Less Maintenance: Our SedimenTrap reduces the need for pretreatment devices.
  • Different Sizes Available: We offer different sizes to meet your storage and footprint requirements.
  • Multiple Layer Capabilities: Competes better with concrete vaults, large diameter pipe, and others.
  • Deep Cover: Some of our systems have gone down as far as 16’.
  • Great For Cold Weather: Our chambers have a better brittleness factor than polypropylene chambers.
  • Smaller Footprint: require fewer manholes and fewer costly assemblies
  • Easy Shipping & Handling: Our chambers stack and nest neatly for transport, storage and can be hand-carried.

Compare StormChamber to any other systems you may be considering.

DOWNLOAD COST COMPARISONS

If our prices are not comparable to our competitors please contact us for a more detailed breakdown of costs and expenses. Other companies may not include additional costs, such as the excavation of stone, in their prices, making them seem better at first glance, but not once compared to all related expenses.

StormChamber Makes It Easy For Contractors

  • StormChamber systems require less maintenance.
  • We provide free design assistance.
  • We provide a design calculator for the storage requirement.
  • We provide the system drawing to incorporate into engineering plans.
  • We provide complete system quotes so you can objectively compare to others.

StormChamber Detail Sheet

Download Detail Sheet

Testimonial

  • “Because we have installed several StormChamber systems, a lot of engineers have asked for advice on competing plastic chambers. We have always recommended the StormChambers. They far exceed the competition on cost and ease and speed of installation.”

    Dean Clark General Manager, SECO, LLC, Chelton, WA

  • “Much less expensive and much quicker and easier to install than the 64″ pipe originally speced for the project.”

    Joe Szabo Owner, J&R underground contractors, Milan, MI

  • “Significantly faster and easier to install than pipe. Significantly less staging room needed and a lot fewer trucks to receive and unload.” (The equivalent of 213 LF of pipe nest on one pallet, 1,913 LF on one truck.)

    Bob Dawson Owner, Dawson Company, Woodbridge, VA

  • “We have installed several StormChamber systems because we find them to be a lot less expensive and quicker to install than the competing systems and we can install them in two layers on very confined sites.”

    Ed Shaw Shaw Construction, Reno, NV

  • “We were surprised by the ease of use of the system and greatly appreciated support provided. We are already looking forward to building our next StormChamber project!”

    Erik Gervais PE, Constructions GFL, Brossard, QC

  • The Loudon One project in Ashburn, VA

    “I also like that it can be cleaned by air vacuuming via inspection /cleanout ports instead of using water. Anytime you have to clean something with water, then you have to have a truck that collects the water and the sediments in it. Depending on where you can dump that, it can get much more costly as opposed to going out with a vacuum truck.”

    Steve Pandish Director of Water Resources for the engineering firm of William H. Gordon Associates in Chantilly, Virginia

  • HUGO SIMS METAL RECYCLING FACILITY IN THE BRONX, NY

    “The choice of StormChambers met the design requirements for strength in such a way that the chambers could be stacked three deep with 30 feet of cover, if needed. Strong enough to sustain the impact of 18-wheelers loaded with steel. They also were 30 percent more cost-effective than other options.”

    Dr. Paul Mankiewicz hydrologist and consultant to the City of New York on storm water and related issues and executive director of the not-for-profit Gaia Institute in the Bronx, NY

  • Double-stacked system in Tukwilla, WA

    “It was easy. There were no difficulties once the owner decided on the StormChamber system. The project is holding up to heavy traffic, pump tracks, and cranes.”

    Tom Radice Abbot Construction

  • Charles-Lemoyne Hospital, Greenfield Park, Quebec

    "We were amazed by the simplicity of this system and have appreciated the support from the Soleno team during the entire project. We are already looking forward to designing another project using the StormChamber!"

    Érik Gervais, P. Eng Const. GFL, Brossard, Quebec
Request A Quote / More Information
In order for us to serve you better, it's preferable that you call us. If you prefer to submit information online, please click the button and complete the form.
If you have questions and would like to speak with a StormChamber representative directly, please call 888-825-4716.
Request A Quote
Find A Rep
Looking for a rep in your area? Please give us a call.
If you have questions and would like to speak with a StormChamber representative directly, please call 888-825-4716.
Find A Rep