Understanding Technical Data for Stormwater Management Solutions
StormChamber is one of the most unique stormwater solutions of its kind. The beneficial characteristics of StormChamber allow it to stand out from the competition in many ways. In fact, it is the largest plastic stormwater chamber available on the market today. StormChamber has the ability to service both commercial and residential clients alike, making it an ideal choice for both.
StormChamber is designed with an open bottom and high-density polyethylene infiltration chamber BMP, allowing this stormwater management solution to work in non-permeable and permeable soils alike, which is highly beneficial.
Storm water regulations continue to evolve, making it more difficult to find storm water solutions that meet the standards. This fact causes engineers and contractors to seek a product that not only meets requirements, but is also flexible and economical. Equipped with the most advanced technology available, StormChamber is unique in its ability to reduce pollutants and other toxins from the water through the patented SedimenTrap™ technology, making it a leader in the industry. Reducing such pollutants and toxins through the best stormwater solutions available is a chief priority in stormwater management.
Despite the incredible size and holding room presented by StormChamber, installation time and labor is up to 50 percent less than similar models. Furthermore, investing in plastic stormwater management solutions such as StormChamber eliminates the need for additional excavation, stone, and the related labor costs. This fact suitably complements the enhanced efficiency that is also present with StormChamber.
Because StormChamber has fewer chambers when compared to other storm water solutions, the installment time isn’t nearly as long. However, fewer chambers is not synonymous with reduced quality, as SedimenTrap actually boosts both efficiency and effectiveness. You would be hard-pressed to find stormwater solutions that boast similar specs with the reduced time and labor required to install StormChamber.
StormChamber Detail Sheet
Design Improvements Made to the StormChamber Model
At HydroLogic Solutions, LLC, we understand the importance of using the latest technology available to not only boost efficiency, but also to provide protection for our local environment. As industry standards continue to change and evolve, the demand for stormwater products will also continue to grow. Luckily, StormChamber continues to develop its technology in order to keep up with the demand. Recent design improvements that have been made to StormChamber include the following:
“Because we have installed several StormChamber systems, a lot of engineers have asked for advice on competing plastic chambers. We have always recommended the StormChambers. They far exceed the competition on cost and ease and speed of installation.”
“Much less expensive and much quicker and easier to install than the 64″ pipe originally speced for the project.”
“Significantly faster and easier to install than pipe. Significantly less staging room needed and a lot fewer trucks to receive and unload.” (The equivalent of 213 LF of pipe nest on one pallet, 1,913 LF on one truck.)
“We have installed several StormChamber systems because we find them to be a lot less expensive and quicker to install than the competing systems and we can install them in two layers on very confined sites.”
“We were surprised by the ease of use of the system and greatly appreciated support provided. We are already looking forward to building our next StormChamber project!”
The Loudon One project in Ashburn, VA
“I also like that it can be cleaned by air vacuuming via inspection /cleanout ports instead of using water. Anytime you have to clean something with water, then you have to have a truck that collects the water and the sediments in it. Depending on where you can dump that, it can get much more costly as opposed to going out with a vacuum truck.”
HUGO SIMS METAL RECYCLING FACILITY IN THE BRONX, NY
“The choice of StormChambers met the design requirements for strength in such a way that the chambers could be stacked three deep with 30 feet of cover, if needed. Strong enough to sustain the impact of 18-wheelers loaded with steel. They also were 30 percent more cost-effective than other options.”
Double-stacked system in Tukwilla, WA
“It was easy. There were no difficulties once the owner decided on the StormChamber system. The project is holding up to heavy traffic, pump tracks, and cranes.”
Charles-Lemoyne Hospital, Greenfield Park, Quebec
"We were amazed by the simplicity of this system and have appreciated the support from the Soleno team during the entire project. We are already looking forward to designing another project using the StormChamber!"